Hard Water 101: Is your shower causing your hair damage? 

Five Tips to Avoid It: a blog about hair damage and how to fix it. 

1. Hard water is a big problem for many people because it can clog pipes, cause soap scum and ruin appliances such as coffee makers. If you have hard water, you’ll understand why soft water is considered a luxury. Soft water is water that is free from the minerals which are present in hard water. There are several ways to get soft water, including having a softener system installed in your home or business. If you have hard water, you might be wondering if you should switch to soft water instead. Hard water is just what it sounds like: water full of minerals. It looks like white spots on your shower fixture, or a ring in your bathtub. These minerals can also build up on your hair, leaving you with dull and brittle locks that are hard to style. Whether you need to soften hard water for yourself or others in your household, this filter will help keep things clean and shiny. Hard water is an unfortunate inconvenience, but with a few simple solutions, you can soften it. 

2: Use a water softener: Do you know what a water softener is? A water softener is used to make hard water softer. It’s comprised of two tanks, the brine tank and the resin tank. Water enters one end of the softener and passes through resin beads that removes hardness. This softened water then exits at the opposite side of the softener, ready for use! 

3: Install a shower filter: Shower filters for hard water have been around for quite some time. Since the hard water problem was discovered, people started looking for innovations to help with this issue. For example, devices that could soften or eliminate the mineral deposits that accumulate in all the plumbing fixtures of a building were invented. However, there’s no one solution to eliminate these negative effects.  I recommend the AquaBliss High Output Revitalizing Shower Filter.

4: Soap up before you get in the shower: If you have hard water in your area, you may have a difficult time taking a shower without soap. It becomes an uncomfortable situation where you can’t wash the soap off because it’s “sitting” on top of the beads of water. It takes some scrubbing to get it off, which is really irritating and time consuming. The best way around this is to use soap prior to getting into the shower: take a bath so that when you go in for your shower, the soap will have been dissolved by the bath water being mixed into the mix. You won’t have to worry about scrubbing with soap and you’ll be able to go straight into your shower with shampoo and conditioner. 

5: Make sure your shower head is clean: To make sure your showerhead is clean from hard water; you have to perform a simple procedure. It is very important, because it will improve the quality of the water and prevent clogging of the showerhead. To reduce the amount of calcium and magnesium, soak a cloth in vinegar and wrap it around the showerhead for two hours. 

6: Clean your nozzle regularly: It’s easy to forget to clean your nozzle from time to time with hard water deposits and debris. This can result in a blocked nozzle that results in inconsistent dispersion rate or filament breakage. 

7: Rinse the nozzle with vinegar every few months: Rinse the nozzle with vinegar every few months from hard water deposits. Simply fill the tank with a cup of vinegar, turn on the hot-water tap and allow it to run for a minute or two. This seems to do the trick because vinegar is quite acidic; it removes hard water deposits. 

Hard water can be problematic, but it is not unmanageable. Compare the pros and cons of softening your water and decide if it is best for you.